Here's what the Vintage Turntable Audiophile community has been anxiously waiting for Mnpctech to create. You simply lift your turntable and twist the foot to adjust and level it's height!
Set of Four Technics SL-23 Feet with 3/4" tall vibration isolators.
*Each foot measures 1-3/4" diameter by 2" or adjusted to 2-1/4" height.
*Each foot has 3/4" tall isolator on top to help prevent vibrations.
Technics SL-23 Height Adjustable Leveling Turntable Isolation Feet allow 1/4" (6.35mm) of adjustment on your vintage or new custom turntable / record player / phonograph player. You can also use these height adjustment / leveling turntable feet on your custom made turntable plinths and bases.
Mnpctech Technics SL-23 level adjustment isolation turntable feet have Sorbothane top isolators to help eliminate and isolate vibration to your tone arm and phono needle cartridge.
These custom made Mnpctech Technics SL-23 height and level adjusting feet for turntables offer more stability to help eliminate vibrations and needle skipping.
*Turn bottom of Technics SL-23 foot for easy height adjustment (1/4" range) for leveling your phonograph / record player or turntable.
*Each foot measures 1-3/4" diameter by 2" or adjusted to 2-1/4".
*Each foot has 1/2" x 3/4" tall Neoprene foot on bottom to help pivot your turntable and protect your audio furniture or fixture.
You have option to order set of three or four level adjustment turntable feet and choice of M6 machine screw or #10 wood screws.
Technics SL-23 TURNTABLE IN PHOTOS IS NOT INCLUDED. Mnpctech Custom Anti-Vibration, Level and Height Adjustable Turntable Isolation Feet MADE IN MINNESOTA. MADE IN USA.
Use Mnpctech Adjustable height sorbothane isolation feet to replace or upgrade the factory feet on your vintage Technics SL-23 turntable.
Mnpctech's best custom made Height Adjustable Leveling Turntable Isolation Feet allow 1/4" (6.35mm) of adjustment on your vintage or brand new custom turntable / record player / phonograph player.
Instructions for Mnpctech Technics SL-23 Level Height Adjustable & Adjustment Feet.
- Remove your Technics SL-23 factory feet and screws.
- Unscrew and remove bottom portion of our Height Adjustable foot.
- Insert included screw into top portion.
- Attach top portion of foot onto bottom of turntable.
- Tighten mounting screw to the point that you can still effortlessly rotate the foot by hand. This way the load of the turntable transfers to the top rubber Isolator and feet perform as intended.