|
These Mnpctech are custom made for the Rega Planar 3 RS, & 50th Anniversary Edition Turntables. Adjustable Leveling Turntable Isolation Feet allow 1/4" (6.35mm) of adjustment. Mnpctech Rega Planar 3 RS, & 50th Anniversary edition Adjustable Leveling Turntable Isolation Feet will help in eliminating and isolating vibrations while listening to your music.. These custom made Rega Research Planar RP9 and Rega planar 10 or RP10 Skeletal Adjustable Leveling Turntable Isolation Feet give your turntable more stability to help eliminate vibrations and needle skipping. Include M6 Machine Screw for attaching feet. *Turn bottom of foot for easy height adjustment (1/4" range) for leveling your phono or turntable. *Each foot measures 1-3/4" diameter by 2" or adjusted to 2-1/4". *Each foot has 1/2" x 3/4" tall Neoprene foot on bottom to help pivot your turntable and protect your audio furniture or fixture. Fit your new or vintage Rega Planar 3 RS, & 50th Anniversary edition Turntable. These Rega turntables are also referred to as the skeletal Planar P9 and Planar P10 phonographs and analog vinyl record players. TURNTABLE IN PHOTOS IS NOT INCLUDED. Mnpctech Custom Anti-Vibration, Height Adjustable Turntable Isolation Feet MADE IN MINNESOTA. MADE IN USA |
Use Mnpctech Adjustable height Rega Research Isolation feet to replace the original Rega Planar 3 RS, & 50th Anniversary edition.
Gary B. writes: "I bought the isolation feet for Rega P6. The sound improvement was quite noticeable with playback clarity & increased spatial dimension to the soundstage. Big ROI for a modest investment. Bonus: Can now stage the power supply under the plinth. The machine workmanship on these isolation feet is superb, easy to install and adjust for leveling."
Look at the bottom of Rega Planar 3 RS, & 50th Anniversary edition turntable placement and mounting locations of the Rega factory stock rubber feet.
Mounting Instructions for Mnpctech Height Adjustable Feet.
- Remove factory feet and screws on Rega Planar 3 RS, & 50th Anniversary edition
- Unscrew and remove bottom portion of our Height Adjustable foot.
- Insert included screw into top portion.
- Attach top portion of foot onto bottom of turntable.
- Tighten mounting screw to the point that you can still effortlessly rotate the foot by hand. This way the load of the turntable transfers to the top rubber Isolator and feet perform as intended.