Mnpctech custom turntable feet do not replicate your vintage or new technics turntable manufacturer feet. These are a custom made substitute or upgrade.
Mnpctech Audiophile Technics SL-7, SL-10 Linear Tracking Direct Drive Turntable Vinyl Record Player Isolation Feet (4 feet)
We use #4 tapping screw for our SL-7, SL-10 feet. Top diameter is 19mm. It's not shown in product photos, but these SL-7, SL-10 feet come with inner sleeve inside the black isolators for the #4 mounting screws. Our feet are a "substitute" using Sorbothane instead of springs.
"When mounting, loosen the screws, so the rubber isolators aren't squeezed tight on the bottom. The table should float upon the feet."
Each foot measures 1.75" tall x 1.75" O.D ( 44.50mm x 44.50mm) with machined 6061 grade aluminum shell. Includes four zinc plated screws.
Technics (Pioneer) utilized the most sophisticated designs for feet across all model ranges, including proprietary screws. We try to create the closest substitute based upon details audio enthusiasts share with us.
They include 3/16" thick rubber foot insert and Sorbothane washer to help prevent needle skipping. The 3/16" thick vibration Sorbothane top isolating pad is pre-cut and attached to each foot. Made in Mnpctech Family Workshop in Minnesota for all Audiophiles around the world. Isolation Feet for Technics SL-7, SL-10 Direct Drive Linear Tracking Custom Turntable by Mnpctech.
Set of the custom made isolation and vibration dampening feet made by Mnpctech for the Technics SL-10 Direct Drive Vinyl Turntable / Record Player.
Close-up of our Technics SL-10 Direct Drive Linear Tracking Custom Record Player / Vinyl Turntable Isolation Foot, made by Mnpctech.
Sold as set of four replacement isolation feet for your Technics Turntable, model SL-10 is a Quartz direct-drive, linear tracking automatic turntable,
Each anti-dampening technics turntable foot measures 1.75" tall x 1.75" O.D with machined 6061 grade aluminum shell.
Photo of the custom made feet for Technics SL-10 Direct Drive Linear Turntable Isolation Feet by Mnpctech.
Photo of the Technics SL10 with Mnpctech Feet by Poodlini. He sells Vintage Vinyl Turntables on ETSY Photo of the Technics SL10 with Mnpctech Feet by Poodlini.
The SL-10 turntable was the first linear-tracking turntable to feature direct drive and was a radical departure from conventional design. It has the same width and depth dimensions as an Vinyl LP record jacket, tiny for a fully-featured direct drive turntable. Within this compact record player, is a computer and precision tonearm drive system. It was part of a luxury range of micro-hi-fi equipment, all built to the same high standards that Technics is known for delivering.
It's very easy to replace or upgrade the feet on your Technics SL-10 direct drive turntable. Just unscrew the factory feet with Philips screw driver and install Mnpctech's custom isolation feet for the Technics SL-10 Turntable Isolation Feet.