Mnpctech is only source for these On/Off switches for accessories or Momentary Desktop Computer Power ON switch (ATX MAIN POWER) or sometimes referred to as the Nuke Button or Fighter Pilots.

Available Colors, Carbon Fiber, Clear, Chrome, Anodized Red & Blue

2 pin wire connectors sold separately.

"Momentary" Toggle Switch replaces Main Power or Reset switch on PC. 

Type: On/Off 2 Pin Wire Connection. Power: 125V, 20 AMPS
Connector Type: SPST-NO, 2 terminal pin on/off.
Material (External): Metal
Mechanical life: 6.000 cycles.
Environment temperature:- 20 degrees ~ 85 degrees.
Heavy-duty Toggle Switch:Built by high quality industrial material.

"Standard" Toggle Switch used for turning On/Off Cooling fans or PC Lights. 

Type: On/Off 2 Pin Wire Connection. Power: 15A 250VAC / 20A 125VAC.
Connector Type: SPST, 2 terminal pin on/off.
Material (External): Metal
Mechanical life: more than 50.000 cycles.
Environment temperature:- 25 degrees ~ 80 degrees.
SPST 2 Pin ON/OFF Switch: You can toggle the handle manually for more than 50,000 cycles under normal use.
Heavy-duty Toggle Switch:Built by high quality industrial material.

One of the most popular case mods we're asked about is how to change your computer's Main Power Switch with a Military style Fighter Pilot switch.

Tools & Supplies Needed:
Power Drill.
1/2" size drill bit.
Small hand file.
Masking Tape.
Pen or Pencil.
2 pin motherboard power connector

We've chosen the Blue Anodized Fighter Pilot Toggle Switch to be used as the Main Power switch. Alongside is 2 pin motherboard connector. The Blue wire is connected to the middle screw (power). The White wire can be connected to either the top or bottom screw, depending which direction you want to push for powering your PC.

NOTE: If you want to switch On and Off a cooling fan or lights, you'll need to use the Standard On/Off Toggle switch instead of "Momentary"

We've connected the White wire to top screw. You will push it up for ON, and again for OFF.

Use a small hand file to clean the edges of the hole after drilling.

Place Toggle switch into mounting hole and then the anodized cover. Fasten on included locking nut.

Connect the 2 pin connector to the Motherboard's Main Power connection.

ou can install another Fighter Pilot Switch cover with a "Standard" style On/Off Toggle switch to power cooling fans, case lighting or other accessories! Great for those PC or projects when you want Nuke Button or Fighter Pilots theme.