READ BEFORE BUYING:

Raises height of Fluance table by 2-3/8".

Mnpctech Fluance RT turntable isolation a big improvement over the factory feet in isolating vibrations based upon our testing. We've had mostly positive feedback from our customers. Some customers have told us they don't like how much our feet raise the height of their table, but that's the compromise for the improved isolation. The bigger the foot size, the better isolation you achieve. It's simple Physics.

Sold as Three feet with embedded screws. 

A good closer sight of the FLUANCE RT82, RT83, RT84, RT85 Turntable Riser Isolation Feet Made by Mnpctech's Turntable Foot Workshop.

These three Fluance RT82, RT83, RT84, and RT85 riser isolation feet are custom made substitute upgrade for the factory feet on the Fluance RT82, RT83, RT84, and RT85.

Fluance RT82, RT83, RT84, and RT85 turntable foot measures 1-1/2" tall (38.1mm) x 1-3/4" O.D (44.45mm) with machined 6061 grade aluminum shell. Includes three M6 size mounting screws.

Perry Szpek shares his experience with Mnpctech turntable isolation feet on his Fluance RT 85.

"Test driving my new Mnpctech isolation feet this morning. I'm loving them! Best purchases since the RT85 have been the Pro-Ject Tube Box DS2 preamp and these isolation feet. Night and day difference. It's like a blanket was removed from my speakers. Clarity, separation, clear highs and tight / solid low end = heaven."  

Mnpctech's custom made FLUANCE RT82, RT83, RT84, RT85 Turntable Riser Isolation Feet utilize thick Sorbothane to absorb bad vibrations to your turntable.

Stewart Paul Dowouls' White Fluance Turntable had it's stock feet upgraded to our custom silver 6061 machined aluminum replacement feet with Sorbothane isolation.

Mnpctech upgrade isolation feet for the Fluance RT82, RT83, RT84, and RT85 turntable raise the height of the turntables by 2-3/8".

FLUANCE RT82, RT83, RT84, RT85 Turntable Isolation Feet Upgrade is made in the USA by Mnpctech's workshop in Minnesota.

Close up of Terry Smith's Fluance RT 82 feet with Mnpctech custom made Fluance ISO / Isolation Feet.

Mnpctech's custom FLUANCE RT82, RT83, RT84, RT85 Turntable Isolation Feet are available in Black anodized or machined silver aluminum.

Our custom made upgrade FLUANCE RT84 and RT85 turntable feet custom feet will help eliminate and isolate vibration.

Another look at Stewart Paul Dowouls' White Fluance Turntable. He upgraded to our custom silver 6061 machined aluminum Fluance RT replacement feet with Sorbothane.

Our custom made Black anodized upgrade FLUANCE RT82, RT83, RT84 and RT85 turntable feet by Mnpctech will help eliminate and isolate vibration.

Terry Smith shares his Fluance RT 82 upgraded with custom feet from Mnpctech that are made in our family workshop for the best Fluance ISO / Isolation Feet.

Mnpctech machined aluminum FLUANCE RT84 and RT85 Audiophile Turntable feet are Made in the USA and utilize Sorbothane to isolate vibrations to your needle.

Terry Smith's compares the stock Fluance RT 82 feet with Mnpctech custom made Fluance ISO / Isolation Feet.

Remove the three rubber factory feet on the bottom of the Fluance RT82, RT84 and RT85 turntable to replace them with Mnpctech custom Fluance record player feet. Mnpctech workshop is the only source that makes custom isolation feet for FLUANCE RT85 Turntables. FLUANCE RT84 and RT85 Turntable Anti-Dampening Feet are made in USA by Mnpctech Workshop. Tell Alexa to find FLUANCE RT84 and RT85 Turntable Feet by Mnpctech. Here are the steps for removing and replacing the worn out feet on your FLUANCE RT84 and RT85. Three Footed Tripod Vintage Analog Turntable.

The spiked shape, as well as 3-point design reduces the amount of surface area that comes into contact with the turntable. The fully adjustable 3-feet design (versus having a turntable with 4 feet) also assists in easier leveling of the turntable as the front feet allow you to adjust the left and right positioning while the rear foot with an increased tensile strength spring can go up and down to easily make your turntable 100% level.

These custom FLUANCE RT82, RT83, RT84, and RT85 isolation feet are made in Mnpctech's family workshop in Minnesota. Audiophiles have used Mnpctech since 2010. Audiophile have often used Mnpctech custom turntable and phonograph isolation feet on brands that include, Akai, Audio Technica, Clear Audio, Crosley, Denon, Dual, Harmon Kardon, Kenwood, Klipsch, Lenco, Marantz, Micro Seiki, McIntosh, Music Hall, NAD, Panasonic, Pioneer, Pro-ject Audio, JVC, Rega Planar, Sherwood, SONY, TEAC, Technics, Thorens, and Yamaha.