Here's what the Mofi Vinyl Turntable community has been anxiously waiting for Mnpctech to create. An easier to access and level adjusting Feet for the Mofi Fender, StudioDeck, UltraDeck, MasterDeck turntable models. Simply lift your Mofi turntable and twist bottom of foot to adjust and level!
*Each foot measures 1-3/4" diameter by 2" or adjusted to 2-1/4".
Mnpctech Height Adjustable Leveling Mofi Turntable Isolation Feet allow 1/4" (6.35mm) of adjustment on your Mofi Studiodeck, Mofi Ultradeck, Mofi Fenderdeck, and Mofi Masterdeck turntables. You can install these leveling upgrade feet on the Mofi Fender, StudioDeck, UltraDeck, MasterDeck Turntables.
CREDIT: MacDonals Mofi Studiodeck Turntable With Mnpctech Leveling ISO Feet.
Mnpctech level adjustment isolation turntable feet have medium grade rubber isolators to help eliminate and isolate vibration to your tone arm and phono needle cartridge.
Unscrew bottom of Mofi Turntable Leveling Foot To Use Screwdriver and Fasten on body / top portion of Mnpctech Mofi Turntable Foot.
These custom made Mnpctech height and level adjusting feet for all Mofi vinyl turntables offer more stability to help eliminate vibrations and needle skipping.
Mnpctech Mofi Turntable Feet Fit The StudioDeck: Entry-level model providing audiophile-grade performance with a 33-1/3 and 45.0 RPM belt drive system.
Mnpctech Mofi Turntable Feet Fit UltraDeck: A mid-tier turntable featuring a 10-inch MoFi Ultra Tonearm, a 1.3-inch Delrin® platter, and an isolated 300 RPM AC synchronous motor for enhanced sound quality.
Mnpctech Mofi Turntable Feet Fit MasterDeck: The flagship model, offering advanced features such as a Delrin/aluminum hybrid platter, a dual-pivot carbon-fiber 10-inch tonearm, and support for 33-1/3, 45, and 78 RPM speeds.
Mnpctech Mofi Turntable Feet Fit Fender x MoFi PrecisionDeck Limited Edition: A special collaboration with Fender, this limited-edition turntable showcases Fender's iconic sunburst finish and is limited to 1,000 numbered units.
Mnpctech's best custom made Height Adjustable Leveling Turntable Isolation Feet allow 1/4" (6.35mm) of adjustment on your vintage or brand new custom turntable / record player / phonograph player.
You can also use these new Mnpctech artisan workshop made height adjustment / leveling turntable feet on your custom made turntable plinths and bases.
Mounting Instructions for Mnpctech Mofi Turntable Level Height Adjustable & Adjustment Feet.
- Remove your factory Mofi turntable feet.
- Unscrew and remove bottom portion of our Height Adjustable foot.
- Insert included screw into top portion.
- Attach top portion of foot onto bottom of Mofi turntable.
- Tighten mounting screw to the point that you can still effortlessly rotate the foot by hand. This way the load of your Mofi turntable transfers to the top rubber Isolator and feet perform as intended.
MoFi Electronics offers a range of turntable models designed to deliver high-fidelity vinyl playback.
Their lineup includes Mofi turntable models that are meticulously designed and manufactured in the USA, reflecting MoFi's commitment to high-quality audio reproduction. Mnpctech's custom Mofi Turntable Feet are also made in USA.