PIONEER PL-518, PL-516, PL-514, PL-560 Turntable Feet (Four)

  • Sale
  • Regular price $206.00
Shipping calculated at checkout.

BEFORE YOU BUY: Depending upon your model, you may need to drill new mounting holes 1/2" closer to edge of turntable base for these feet to clear bottom cover. Before you drill holes, insert included screw into our foot and pre-mount into factory hole to confirm our foot clears the Black bottom cover. If not, drill new holes 1/2" closer to the outer edge of turntable base. We've had handful of customers over the years state that our foot would collide with bottom cover. These feet are not an exact match to factory feet. They don't have springs. They're a custom made substitute upgrade for the factory feet. 

PIONEER PL-518, PL-516, PL-514, PL-560 Turntable Feet (Four)

Pioneer Audiophile turntable foot measures 1-1/2" tall (38.1mm) x 2-3/4" O.D (75mm) with machined 6061 grade aluminum shell.

Replace your PIONEER PL-518, PL-516, PL-514, PL-560 Vinyl Turntable factory feet with our machined aluminum replacement. Turntable stock feet with our custom silver 6061 machined aluminum replacement feet.

Need to shop and buy Pioneer PL-560 turntable feet with isolation

Pictured above is vintage Pioneer PL-560 turntable with new feet by Mnpctech.

Mnpctech creates peproduction Pioneer turntable insulator feet to repair Pioneer turntable models that include, PL-518 and Pioneer PL-560. These custom feet will replace the old rotted and degraded rubber feet in the original Pioneer feet.  The Pioneer original foot part number is PEB-086, but they're no longer manufactured.  The original factory Pioneer turntable feet insulators were made from latex rubber that have deteriorated after 15 years of longer. These new Pioneer PL-series rubber Insulators are made by Mnpctech with Neoprene Black rubber and will last many years. You can restore the original Pioneer turntable feet by Mnpctech back to life. 

Each PIONEER PL-518, PL-516, PL-514, PL-560 foot measures 1-1/2" tall (38.1mm) x 2-3/4" O.D (75mm) with machined 6061 grade aluminum shell. and has thick rubber foot insert with Sorbothane washer on top. Includes four #10 zinc plated wood screw to bite into the wood plinth. Each screw is 1-3/4" length.

Screw Type Size For Pioneer PL series Turntable Record Player

You can use 1/8" Drill bit to widen the existing factory screw holes before attaching our larger custom feet with included #10 wood screws into the base / plinth of your vintage Pioneer turntable.

Our custom PIONEER PIONEER PL-560 turntable feet custom feet will help eliminate and isolate vibration. Mnpctech machined aluminum PIONEER PL-518, PL-516, PL-514 Turntable feet are Made in the USA.

Made in Mnpctech's family workshop in Minnesota.

find the best pioneer 518 isolation rubber feet