How To Guide Install JACKYLED Solar Security Light Outdoors & Review
This is our "How To Guide" on installing the new JACKYLED Solar Security Light on Amazon Prime for your home, driveway, garage, barn, deck, shed, cabin, or backyard patio. The JackyLED ultra bright solar light lights up automatically at night, turns off and charges during the day.
JACKYLED Ultra Bright Solar Security Light User Features:
- No need for installing wires, it's solar powered with high energy efficiency, so you save a lot of home electricity bills.
- Built-in sensitive PIR motion sensor detects 20 - 26ft away distance and with a range of 120°.
- Multi-angle adjustable housing, so the light can be adjusted 90°, and the solar panel can also be angled up and down 120°
- Use as a flashlight when the solar panel is removed.
- Dummy security camera look helps deter burglars with it's red flashing security camera design.
- Build-in charge and discharge circuit protection IC, provides safe usage.
- IP66 waterproof, can withstand various outdoor weather conditions.
- Rustproof ABS plastic casing, durable for outdoor use.
JACKYLED Ultra Bright Solar Security Light Specifications:
Solar panel Type: 5V 2W Polycrystalline
Solar Conversion rate: Up to 18%
Battery: 3.7V 4400maH
Lumen rating: 2400LM
Waterproof rating: IP66
Color Temperature 6000-6500K
We Purchased the JACKYLED Solar Powered Security Motion, HERE
The JACKYLED Solar Security Spotlight design looks just like a real security camera. It has a Red blinking light that emulates a camera to discourage robbers and Trespassers.
The JACKYLED Ultra Bright LED solar security light includes instructions and mounting hardware.
You can see how the JACKYLED design was inspired by the more expensive commercial security cameras. It's convincing look really helps in scaring off people that have no business on your property.
The JACKYLED Solar Powered LED Light has motion sensor in the center of eighteen leds rated at 2400 Lumens brightness.
The JACKYLED Solar Security Light has 360 degree swivel for manual adjustment, so you can aim at the LEDs at area you wish to illuminate.
You can also adjust angle on the solar panel on the JACKYLED Solar Security Light so you can capture the best sunlight for charging Outdoors.
Another view of the angle adjustable solar panel on the JACKYLED Solar Powered Security Motion Sensor Light for Outdoors.
The Power Mode switch is on the back of the Jackyled Solar Powered Motion Security LED Light. It has 3 Working Modes. You change the lighting mode of the solar light at any time via the rear button of the solar panel. Note to press the button for several seconds to turn the light on before installation.
JACKYLED Mode 1: When motion is detected, the dim light changes to super bright light.
JACKYLED Mode 2: Full bright light only when someone comes and then auto-off after people leave for 25 seconds.
JACKYLED Mode 3: Constant bright light, auto turns to dim light after 4 hours.
JACKYLED Ultra Bright Outdoor Solar Security Motion Sensor Light Instructions.
JACKYLED Ultra Bright Outdoor Solar Security Motion Sensor Light Step by Step Instructions outline everything you need to know.
The back of the JACKYLED Ultra Bright Outdoor Solar Security Motion Sensor Light Instructions.
JACKYLED instructions include a template for determining the exact location and drilling the mounting screws for their Ultra Bright LED Solar Security Spotlight.
Four Plastic anchors and tapered screws for mounting the JACKYLED are Included with the ultra bright motion sensor security led light.
Tools Needed (Suggested) for installing the JACKYLED Solar Powered Motion Sensor Security Light bought from Amazon Prime, HERE
*Scribe for marking mounting screw locations (see template above)
*3/16 Drill Bit for drilling the green anchors for the mounting screws
*Medium size Phillips screw driver
*Hammer for tapping in the green anchors.
I'll be mounting the JACKYLED solar powered motion sensor ultra bright light on fascia of our garage.
Use the template in the JACKYLED instructions for determining the location of the mounting screws. I used a Scribe for marking the mounting anchor holes for the JACKYLED solar powered motion sensor ultra bright LED spotlight.
Using 3/16 size drill bit to drill holes for the included green plastic anchors.
Use hammer to gently tap in the green plastic anchors for the JACKYLED solar powered motion sensor ultra bright spotlight.
All of the green plastic anchors are inserted into the aluminum first and the wood behind the fascia on the garage. Next step is mounting the JACKYLED Motion Sensor Solar Light.
Use Phillipes screwdriver to remove the set screw in the base of the JACKYLED Adjustable Solar Security Spotlight with 4400mAh Large Battery Capacity Waterproof Wireless Flood Light.
After Removing the base set screw, you can pull off the base mount of the JACKYLED Adjustable Solar Security Spotlight. Doing this will allow you to screw in the mounting screws.
Fastening in the mounting screws for the JACKYLED Ultra Bright Solar Security Light That is Weatherproof for Outdoors.
The design of the JACKYLED Ultra Bright Solar Security Light Looks Like commercial security camera.
JACKYLED Ultra Bright Solar Security Light Produces 2400 Lumens! I like that it looks like a real security camera. This will help deter people from lingering or entering our property.
JACKYLED Ultra Bright Solar Security Light Pros:
*No wiring needed.
*Easy Do-It-Yourself Installation.
*Low Price, $32.99 on Amazon Prime.
*Looks like a real Security camera with flashing red light.
*Adjustable for different angles for the lighting and solar panel.
JACKYLED Ultra Bright Solar Security Light Cons:
*Plastic housing durability is questionable for overall longevity.
*Light spread could be wider for a driveway, but we plan to buy 2nd JACKYLED Ultra Bright LED security light for the other side of our garage.