ATX Pin Extraction Removal Tool.
ATX Motherboard / PC Power Supply Connector Pin Removal Tool Will Save time and headaches. Use this tool when custom sleeving your PC Power Supply.
- Package Dimensions : 4 x 1.85 x 0.06 inches; 0.01 Ounces
- Item model number : 11-03-0044 K
- National Stock Number : 5120-01-615-9717, 5120-01-532-3472
- Date First Available : November 15, 2013
- Manufacturer : Molex
- ASIN : B00GOIY1NE
This Molex ATX Pin Removal Tool can be used to remove your power cable connection pins from motherboard 24 pin connector, 8 pin connector, 6 pin connector, and 4 pin connector. This includes both AMD Radeon and Nvidia series graphics cards.
The two prongs on ATX Pin Extractor Tool must be inserted on opposite side left and right side of the pin in your 24 pin, 8 pin, 6 pin, and 4 pin power connectors.
Gently push the two prongs of this Molex Mini Jr ATX Pin Extractor Tool into the connector. Remember previous step, tool prongs must be opposite sides of the pin.
- ATX Pin Remover/Removal Tool For When Custom Sleeving PC Computer Connectors, Motherboard Plugs, PSU, PC Power Supplies.
- Works on pins on computer ATX, EPS, and PCI-E power connectors
- Be careful when using this ATX Extraction tool. The prongs can be bent if used incorrectly. You should not have to push hard on the tool, and this can cause the prongs to bend. If you haven't used an ATX pin extraction tool like this before, please be aware that it may take some practice.
- NO RETURNS ACCEPTED ON THIS ITEM (This is due to customers improperly using the tool and bending the ends when removing 24 pin connections)
This ATX Pin Removal Tool can be used to remove power cable connection pins from motherboard 24 pin connector, 8 pin connector, 6 pin connector, and 4 pin connector.
The two prongs on ATX Pin Extractor Tool must be inserted on opposite side left and right side of the pin.
Gently push the two prongs of the ATX Pin Extractor Tool into the connector. Remember previous step, tool prongs must be opposite sides of the pin.
This ATX Pin Removal Hand Tool can also be used for removing pins in 4 pin, 6 pin, 8 pin, and 24 pin motherboard computer power connectors,
Use same method as shown with 4 pin connector above to remove motherboard connector pin with this ATX Pin Extractor Tool.
Gently push the two prongs of the ATX Pin Extractor Tool into the Motherboard 24 pin connector. Remember in previous steps with 4 pin connector, the two tool prongs must be opposite sides of the pin.
Push the two prongs of the ATX Pin Extractor Tool as far as you can into the Motherboard 24 pin connector, then you can remove the cable wire.
Use 1/4" size flat head screw driver to widen or fix bent prongs on ATX Pin Removal Tool and Pin Extractor.